• I have followed the instructions, but waveforms do not seem correct (not square), I can measure the output frequency but there is no output voltage (measured with a multimeter and an oscilloscope), what can I do?
• If I use the Program now, making the 5 steps to start a program, does it work already or do I have to do or push any buttons on the Generator?
• If I open spooky2 I can see the program and the Instruction steps 1-5. Why I don't see "program options anywhere"?
• Spooky swaps Out1 and Out2 waveforms on its own. There is no problem?
• When we select the option to invert and sync output2, wouldn't that just cancel the waveforms?
• When a frequency set has other settings in it, do they override the settings in the preset?
• I choose the program set amplitude to 20V Inverse +Sync then tick Reduce Amplitude 10kHz but then I only get 0.6v or 0.45v 0.84v readings.
• The contact tubes don't require as much time as the 180 seconds. Is there a reason/setting to change that parameter?
• Try the spooky converge and spectrum sweeps, but the program says you need two DNA remotes.
• What is Frequency 2 (F2)?
• Demonstration videos show a multitude of channels but I only show channel 3 and no others. Is this correct?
• In Spooky, the channel shows up under the numbers 5, 6, 7 and 8. Is there a way that I can make them display as generators 1, 2, 3 and 4?
• Damped Waveform does not match what is being shown on the Spooky2–XM generator.
• In the Channel Control panel on Spooky2 software, what is the function of channel control - ~ X?
• Do not understand using the modulated waves and creating dynamic carriers. And do not understand the paragraphs dealing with frequencies lower than 1MHz and also above 1MHz.
• How to save to the program preset box?
• How many generators will xp handle?
• Is there any chance of having a mac-based system, in the near future?
• Can you please help me find the program settings where I can set the wave form?
• Remove duplicate frequencies checked?
• Install Error, SComm32.ocx and failed to activate control "VB.UserControl".
• Going through spooky boost, and applying harmonics on OUT1 frequency to get the frequency of OUT2 when "Follow OUT1" is ticked.
• Kundalini preset, noticed that it requires that Refresh Rate be changed in the Advanced Menu. Should all other gens should be stopped while running this refresh rate? What is the effect of changing the refresh rate?
• Is the mold spectrum sweep safe to use in contact mode?
• If sweep spectrum hits all pathogens in every frequency, why would this not take care of lyme in one application?
• Do we change the dwell time for any of the sweeps?
• Quick question on either Spectrum or Coverage sweep scans, how long do you do them? 24-48hrs straight? I checked the forum and no information on this matter.
• Does the Spooky Spectrum Sweep kill all parasites in all organs including flukes?
• How do I open the frequency list? The zip file of Spooky frequency could not be opened. Do you have to purchase the software first before you download it? What is golden ratio?
• How to create a Spectrum Sweep for 1-15000 Hz/180sec.