Can I leave 2 items connected at the same time to the Boost on a generator? Does the software determine which device the signal goes to?

1. Do not leave 2 items connected at the same time to the boost on a generator. So only one item connected to a boost at a time.

2. The Software itself cannot determine what mode you are going to use. So YOU have to always choose the correct PRESET in the software to run each piece of equipment. There are "Presets" which are pre-set with frequencies AND the correct settings to correctly run each equipment - (R) for Remote, etc etc etc. AND under Presets there is "Shell (Empty) Presets" where you choose the correct preset mode (R), (C), etc, And you have to go to Programmes and put in the frequencies you want to use to treat. An example of a Shell Empty Preset is "Killing (R) -JW" (which could be used to kill pathogens by Remote), and you put in the frequencies yourself out of the Programme section.

3. The Out 1 and Out 2 ports on the Booster are different from the High Power Port. They all do different things, too much to explain here. Would be good if you use the Spooky2 User's Guide to read and learn. Search for 'Boost" and you will see answers, starting on Page 12. Also lots of info in the link Kirstin shares below.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1685730364922193/