What is the pulse duration of Spooky2 XM? What about amperage? I want to use High Voltage Galvanic.

I have created three waveforms to accomplish what you needed.
When run at the frequency specified in their name, they deliver two pulses of 20 microseconds separated by 100 microseconds.

Due to the extremely short duration of the pulse, and the fact that the waveforms could only have 1024 data points, a simple square waveform with positive amplitude has been used.

So, if you want two 20us pulses separated 100us at a rate of 50 Hz, use MM_Galvanic50.csv and select a freq of 50Hz. This is the lowest freq that can be used.
If you want two 20us pulses separated 100us at a rate of 100 Hz, use MM_Galvanic100.csv and select a freq of 100Hz.
If you want two 20us pulses separated 100us at a rate of 150 Hz, use MM_Galvanic150.csv and select a freq of 150Hz.

MM_Galvanic50Hz.csv

MM_Galvanic100Hz.csv

MM_Galvanic150Hz.csv

Copy the waveforms to your \Spooky2\Waveforms folder, relaunch Spooky2 and they'll be available in the custom waveforms menu.
Use an amplitude of 20V, select Inv+sync, and use the Boost(1.0 2.0 3.0)

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=6&t=5778

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more
Our Blog
Get the latest news and updates first
Our helpline hours:
9 AM – 6PM UTC+8, Monday – Friday
Video Guides
Learn how to use Spooky2 with our short, step-by-step video guides