You will most likely not feel anything when the signal has the frequency above several kHz, even with the signal's amplitude voltage of 20V.
Also if you are using Spooky boost v2.0 and use the colloidal silver port, you will not feel it since there is 10k resistor in the circuit to keep the current down.
If you wish to run full power without the resistor we offer a cheap adapter for use on either the BN or MN ports of our Spooky Boost 2.
Here is the link for the cheap adapter:
http://www.spooky2-mall.com/spooky-accessories/bnc-female-connector.html
Comments
Please sign in to leave a comment.