When you are actively running a Plasma program, prior to turning on the Spooky2 Central, plug the ultrasound in. Select either fast or slow, and that's all there is to the ultrasound.
The ultrasound is driven by the frequency that is sent to the plasma tube. Fast = 1/16th and Slow = 1/256th the frequency of Out 1 -- a harmonic.
There is a difference between the use of the PEMF Coil and Modified Contact of the Spooky2 Central, and the use of the PEMF Coil direct to the generator and Contact from a generator.
Both PEMF and Modified Contact are independent outputs that are active anytime the Spooky2 Central has power and the switch is turned on. They both produce a fixed 100 Hz output and are primarily designed to be used along with the Plasma.
The Coil Presets for DB's protocols are completely independent of the Plasma presets you are indicated to run.
When looking at the protocol, take note when it uses the term Spooky2 Central Contact (this is the fixed output of the Spooky2 Central ) vs. Contact presets.
Likewise, the use of the PEMF Coil direct to a generator is marked by M = (Spooky Coil Preset) and is typically used in place of remote on Gen 2 when indicated as an option.
For more details, please check the link:
http://spooky2.com/forums/viewtopic.php?f=14&t=7068
Comments
Please sign in to leave a comment.