Could someone please explain Octave sub-harmonics of 380nm light per Dr. Fritz-Albert Popp's biophoton research further? It appeared on a biofeedback scan with a person who has cancer.

1. What Popp discovered was that benzo[a]pyrene (the cancer producing molecule) absorbed the UV light, then re-emitted it at a completely different frequency -- it was a light "scrambler". The benzo[e]pyrene (harmless to humans), allowed the UV light to pass through it unaltered. Popp was puzzled by this difference, and continued to experiment with UV light and other compounds. He performed his test on 37 different chemicals, some cancer-causing, some not. After a while, he was able to predict which substances could cause cancer. In every instance, the compounds that were carcinogenic took the UV light, absorbed it and changed or scrambled the frequency.

2. Photorepair, it is well known from biological laboratory experiments that if you blast a cell with UV light so that 99 per cent of the cell, including its DNA, is destroyed, you can almost entirely repair the damage in a single day just by illuminating the cell with the same wavelength at a much weaker intensity. To this day, scientists don't understand this phenomenon, called photorepair, but no one has disputed it.

3. I believe L380 is a Spectrochrome Color - violet. To use: "Create Program" and use L380 as frequency for one generator, Spooky2 will convert this to the proper frequency. Use another generator and load with the cancer cell repair octave. Run the two generators simultaneously. Tip: Use global start and stop. The patient's body receives the "cancer cell repair" frequencies, and at the same time the healing violet light frequency.

4. Yes, enter "L380" under "Frequencies" in the "Create Program". I've just been told by a seasoned spectrochrome user that the dwell time of the Spectrochrome frequency is for one hour even for the Spooky converted Spectrochrome frequency and that the ten minute maximum dwell time is totally inadequate to be effective. Dinsha's instruction for tonation is no more than one hour per treatment (using the colored filter and lamp). And I was further advised on the settings: "so the Spectrochrome frequency needs to be run for an hour, and the dwell needs to be an hour, and the duty cycle needs to be 50%. The waveform must be a Sinewave."

For more information please check this link:
http://www.spooky2.com/forums/viewtopic.php?f=12&t=7560

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.